Canon Not Working on Autofocus

 Canon printer is one of the multi-purpose printers used for printing documents, pictures, files, etc. This printer is modified with multiple attractive features that make your task quite comfortable and efficient. Canon printer is providing high resolution and large volume printing of documents, photos, files, etc. Once you buy a Canon Pixma printer, inkjet technology will assist you to provide 3D printing quickly. Like other printers, Canon printer users also encounter several problems while operating Canon printers. In this article, you will get troubleshooting steps to fix Canon not working on Autofocus error easily. To resolve quickly, you must call the Canon customer support number to get some accurate tips.

 

Troubleshooting Solution to fix Canon not working on Autofocus error

 

Some simple steps are given below to troubleshoot Canon not working on autofocus errors easily.

 

Examine the Focus Mode Switch on Lens

 

• Autofocus won’t function if the focus mode turned on the lens is organized to <MF> position
• Establish the focus mode switch available on the lens to <AF> position.

 

Clean the Lens and Camera Electrical Contacts

 

Information sharing between camera and lens is handled by the electrical contacts available on both the camera and lens. If these electrical contacts on the camera or lens get dirty or filled with dust, communication can’t be processed appropriately. In many conditions, autofocus may not function efficiently. If the electrical contacts on the camera or lens get dirty, clean them with a dry and clean cloth.

 

Caution

 

Precaution while cleaning electrical contacts between camera and lens.

• Don’t wipe off the contacts with a wet cloth. It can damage contacts.
• Don’t touch the contacts directly with your hands. It can cause corrosion while touching contacts with your hands and also make the camera non-functional.
• While cleaning the contacts on the lens, don’t damage the lens surface.
• If the contacts are damaged completely, you must call the Canon helpline number to get them fixed instantly.

 

Properly Mount the Lens

 

• Both the lens and the camera establish communication between each other. For the cause, if the lens is not properly mounted, there may occur situations where the autofocus doesn’t function appropriately.
• Mount the lens correctly.

 

Examine the Custom Function Settings

 

Suppose the autofocus won’t function when half-tapping the shutter button, it is because the custom function has been amended to one. In such a situation, the setting is organized to use an AE lock once the shutter button is tapped halfway to change the setting to zero. Please refer to the instruction manual of the camera for more information about changing the setting. 

 

Few other steps to fix Canon not working on Autofocus

 

• Remove the lens from your camera.
• Keep the lens in MF mode
• Turn the focus ring on one side. Hear a clicking noise or two but never force the lens.
• Turn the focus lens to the opposite side. You may listen to a couple of tapping noises. The focussing motor should be put back in the appropriate place.
• Keep the lens back on the camera
• Keep the lens in AF mode
• Switch on the camera
• Keep the camera in Auto or P Mode
• Click a test photo
• If done, tap close.

 

Conclusion

 

If you have examined all the tips given above but seen no improvement, you must call the Canon customer service number to get accurate suggestions immediately. Suppose you are experiencing trouble with the lens manufacturer, contact the manufacturer soon to fix it. Canon experts are capable, professional and fully trained to assist you in resolving any issue in Canon printer. Canon customer service center is opened 24/7 to provide you with better and quick assistance at one call or text.