How to Configure IJ Start Canon?
Basic
Procedures Before You Configure Canon Printer
·
Always
put the model number of your printer in hand before starting with the
configuration procedure
·
Confirm
that your device has sufficient storage space for establishing the driver
·
Confirm
that the printer is plugged appropriately in the power source
·
Confirm
that your device has an active internet connection.
Configure
Canon Printer On Windows Wirelessly
·
First
of all, download and install your printers driver from the official website of
Canon.com/ijsetup
·
Switch
on your Canon printer and confirm that it is appropriately plugged into the
power source
·
After
that, access the downloaded file of driver setup and tap on next till the time
you observe the screen where you look at the option of selecting the wireless
setup
·
Now,
after selecting the wireless option, move to your Canon printer screen and
press on the Wi-Fi setup tab
·
Choose
the device settings and tap on Ok
·
Next,
select device settings, then LAN settings, and tap on the Ok button
·
Press
on LAN settings, then Wireless LAN setup, and tap on Ok. Now, your printer will
browse for the access point.
·
Confirm
that your Wi-Fi router is switched on. Now, a wireless flash lamp will blink at
your printer
·
A
network list will appear on your computer screen. Choose your Wi-Fi network
from the list and tap on Ok
·
Now,
it will request your WPA/WEA key. Type your appropriate password and tap on the
Ok button
·
Your
printer will affix with a Wi-Fi network after some moments.
To confirm that your
printer is attached to your Windows system, go through these steps.
·
Move
to the Control Panel and select the device and printer option
·
Examine
if your printer is shown on your next screen with a green check spot, then you
should manually attach by tapping on Add Printer option.
·
Now,
you will observe a list of all available printers on your computer screen.
Choose your Canon printer from it.
·
Press
Next and wait for a few seconds for your printer to get attached
·
Once
it is attached, you will observe that your printer is attached well with a
green checkmark.
Methods
to Configure Canon Printer Through USB or A Wired Network
Some crucial step is
given below to sync Canon printer via USB cable or a wired network.
·
First
of all, download the Canon printer driver and complete the installation
procedure
·
After
that, affix printer and windows system with a USB cable
·
Access
the control panel from the Run dialog box from the windows search option
·
Choose
devices and printers option. Now, you will observe a printer with a green
checkmark
·
If
you don’t observe your printer, tap on Add printer option to attach it manually
·
Lastly,
your printer will get attached and will be prepared for use.
Procedures
to Configure Canon Printer on Mac through the Official Website of IJ Canon
Start
A few simple steps
are listed below to set up a Canon printer on Mac.
·
First
of all, download and configure the driver through ij-start-cannon.com
·
Move
through the steps mentioned above in the first section of this write-up to keep
the Canon printer on the same wireless network as your device
·
Next,
access the Apple menu and tap on System Preferences
·
Now,
tap on the printer-shaped icon known as printers and scanners from the system
preferences window.
·
Press
on the plus sign available near the bottom left corner of your screen after
which a pop-up window will appear
·
Observe
your printer’s name in the left-hand pane if it is already coupled over the
network. Tap on it to start the setup procedure
·
Once
the procedure is finished-up, your printer will be shown with a green checkmark
and will be prepared for use.
Conclusion
This article will assist you in configuring up your printer via the ijcanonn start setup method. After moving through the instructions given above, configure your printer on windows and mac devices via ij-canon-start setup. For any further assistance, feel free to approach us on the Canon customer service number to get some accurate suggestions immediately.